 |
| FEATURED PRODUCT |
| ● |
5 SATA drivers, with one Redundant |
●
|
Drive mismatch warning (LED's)
when drives are removed and re-installed incorrectly |
●
|
RAID 0, 3, 5 Configuration based on I/O |
● |
Rotary switch for easy configuration of
RAID level Options, 512/2048 RAID Sector size |
| ● |
RAID V (Seagra’s IP) Technology, best of both RAID 3 and 5 |
● |
Complete ease of use, Auto Configuration |
| ● |
RAID Cache for Increased performance resulting in supporting more video streams. |
● |
Continuous and silent (background without impacting performance) RAID Watch for better drive reliability and uptime |
| ● |
Sustained Performance: RAID V (3/5)240Mb/s |
● |
eSATA Hot swap support for operating systems with this featured enable. |
| ● |
RAID 3 or 5 (V) supports single 10-bit 1080i HD, very cost effective
near-line storage library. |
● |
Staggered drive
spin up for reduced wattage
power supply(s). |
| ● |
Efficient sustained performance reduces array count i.e , 3 arrys instead of 4 |
● |
Implement RS232 port-configuration and
maintenance |
| ● |
SATA drive
Hot Swap (Seagra’s IP)-even when I/O’s are active (No Degrade in Performance) |
● |
Event logging features to log events for better technical support. |
●
|
Non-Redundant Mode Performance same as Redundant Mode (with one drive fail or shut-down) |
● |
Complete Hardware RAID , no Host RAID Software or multi eSATA channel host
bus adapter Required (NEED only one external Serial ATA) |
| ● |
Auto Rebuild when new drive inserted without impacting performance. |
● |
Operating system
independent, Supports all OS (Windows, Linux , MAC and more). |
| ● |
Built-in-on-the-fly RAIDGuard (Seagra’s IP) to minimize downed drives. |
● |
1.5 Gb/s SATA Gen 1 and 3 Gb/s SATA Gen 2 host Interface |
